Precision measurement ensures a temperature resolution of 0.1°C and humidity accuracy of plus/minus 2.5%. This enables more precise control of temperature and humidity, which contributes to improvement in product quality.
Precision measurement ensures a temperature resolution of 0.1°C and humidity accuracy of plus/minus 2.5%. This enables more precise control of temperature and humidity, which contributes to improvement in product quality.
Data can be logged to the unit (SD Card) while communicating with PC (or PLC) via LAN. Even in the event of network error, the unit will continue to record data. Production technology divisions can centrally control management via network while manufacturing floors can localize control using SD cards.
The station has an alarm output. Unusual temperature and humidity are made visible, enabling you to make a quick response and to make it easy to systemize manufacturing lines.
With built-in battery backup, LAN communication and logging operation won’t stop even in the event of power outage or sudden disconnection.
* In network mode, operation continues for approximately two hours on batteries alone. However, battery life will vary depending on the measurement environment, battery type, or battery performance.
Simple, user-friendly PC software* is available as a standard feature (Station Utility: Setup tool, logging tool, and SD Viewer ES).
Unit setup and data logging are possible via LAN network.
Also, logged data can easily be displayed in the waveform graph.
* Download the PC Software Station Utility from the following OMRON website (http://www.fa.omron.co.jp/station-u-e) .
To view waveform graphs in real time, and display measured values on a floor plan of the site, it is necessary to install Wave Inspire ES environmental visualization software.
A Certificate of Calibration can be issued upon request. (It is necessary to ship the product back to OMRON.)
To obtain a Certificate of Calibration at time of purchase, please select a type that includes a Certificate of Calibration.
As the sensor head and station are digitally connected, this calibration service is available only for the sensor head.
∗ The calibration service does not include repairs or adjustments.
last update: December 01, 2016
Model | ZN-THS11-S
(Sensor head: 1.5 m type) |
ZN-THS17-S
(Sensor head: Anchored type) |
|
---|---|---|---|
Temperature | Measurement range | -25 to +60°C | 0 to 60°C |
Measurement precision | ±0.3°C (at 25°C) | ||
Resolution | 0.1°C | ||
Relative
humidity |
Zero point | 0% to 99% | 20% to 85% |
Span | ±2.5% (at 25°C, 10 to 85%) | ||
Resolution | 0.1% | ||
Weight (packaged) | Approx. 300 g | ||
Accessories | Instruction sheet
Mounting screw (M3 x 8) x 1 |
Instruction sheet
Mounting screw (M3 x 8) x 1 Caps to secure cable |
Model | ZN-THX21-SA |
---|---|
Sensor that can be connected | Thermo-Humidity Sensor Head (ZN-THS[][]-S) |
Display | LCD 7-segment 5-digit 2-step display, auxiliary information indicator display |
Measurement interval | 10 s, 20 s, 30 s, 1 min, 2 min, 5 min, 10 min, 20 min, 30 min, 1 h |
Calculation function | Instantaneous value, maximum value, minimum value, average value |
Operating mode | Network connection mode, sleep mode *1
air particle sensor (ZN-PD[][]-S[]) connection mode *2 |
Recording mode | Continue *3, ring *4 |
Alarm signal output | Output to photocoupler (External power supply: 12 to 24 VDC, Load current: Max.
45 mA) Alarm hold setting is possible. *5 |
Communications interface | Ethernet (10BASE-T, 100BASE-TX) |
Communications protocol | Socket (TCP), original protocol |
Internal storage device | Internal memory: Approx. 8,500 data items *6 |
External storage device | SD card (to save measured values and to save/read set values),
Recommended SD card: HMC-SD291 (manufactured by OMRON) ∗7 |
Power supply voltage | DC input: 24 VDC ±10%
Battery: 2 AAA batteries *8 |
Battery life *9 | Approx. 1 year *9 (sleep mode)
Approx. 2 hours *9 (Network connection mode, air particle sensor (ZN-PD[][]-SA) connection mode) Measurement interval of 10 minutes (with 2 AAA nickel metal hydride batteries, with SD card not inserted) |
Operating temperature range | 0 to 60°C |
Operating humidity range | 20% to 85% (no condensation) |
Weight (packaged) | Approx. 500 g |
Accessories | Instruction Sheet, Startup Guide, DC cable (straight type), Ferrite core,
Alarm output connector ∗10 |
last update: December 01, 2016
Tolerance class IT16 applies to the dimensions unless otherwise specified.
TITLE | DOCUMENT TYPE | SIZE |
ZN-PD-SA/THX21-SA/DPX21-SA | Catalog | 3770 KB |
---|---|---|
ZN-THX21-S Thermo-Humidity Station User's |
Manual | 2702 KB |
ZN-THS1-S Air Thermo Sensor Head |
Manual | 469 KB |
ZN-THX21-S Air Thermo Station (Start-Up Guide) |
Manual | 20549 KB |
ZN-THX21-S Thermo-Humidity Station User's |
Manual | 2611 KB |
ZN-THX21-S Air Thermo Station |
Manual | 3893 KB |
ZN9-ACP01 AC Adapter for ZN-X |
Manual | 353 KB |
ZN9-ED0-S DC Cable |
Manual | 468 KB |
ZN9-EM-S Mounting Magnet for ZN-X |
Manual | 5048 KB |