Omron, WL, WLM Series

last update: December 19, 2013

Standard Models

Many Variations in Standard Limit Switches
A Wide Range of Models

The WL Series provides a complete range of Limit Switches with a long history of meeting user needs. Select environment-resistant specifications, actuators for essentially any workpiece, operating sensitivity matched to the workpiece, operation indicators to aid operation and maintenance, and various wiring specifications.

Environment-resistant Models

Select from Six Types of Environment Resistance

The series includes Airtight Switches, Hermetic Switches, Heat-resistant Switches, Low-temperature Switches, Corrosion-proof switches, and Weather-proof Switches. Select the one required by the onsite environment.

Spatter-prevention Models

Excellent Performance on Arc Welding Lines or Sites with Spattering Cutting Powder
Ideal for Welding Sites

Stainless steel and resins that resist adhesion of spatters are used to prevent troubles caused by zinc powder generated during welding.

Long-life Models

Mechanical Endurance of 30 Million Operations
Long-life Models for High-frequency Applications

Long life has been achieved by increasing the resistance to friction and creating better sliding properties in the head mechanism. Greater visibility is provided when setting with a fluorescent display for setting the stroke.

Features Common to All Models

DPDB Operation

The double-pole, double-break structure ensures circuit braking.

Degree of Protection; IP67

O-rings, cover seals, and other measures provide a water-proof, drip-proof structure (IP67).

Approved Standards to Aid Export Machines

Various WL/WLM switches are approved by UL, CSA, TÜV, EN/IEC, and CCC making them ideal for export machines.

High-precision Models Available in All Switch Types; Ideal for Position Control

High-precision models achieve a very small movement to operation (approx. 5°) and a repeat accuracy that is twice that of basic models.

Operation Indicators for Easier Daily Inspections*

Confirm operation with a neon lamp or LED for easier startup confirmations and maintenance.
* Operation indicators are provided on Indicator-equipped switches, Spatter-prevention Basic Switches, and Long-life Basic Switches.

Models with Connectors to Reduce Wiring

Reduce wiring with one-touch connection. Models with direct-wired and prewired connectors that make Switch replacement easier are also available.

last update: December 19, 2013

Approved Standards

Agency	Standard	File No.	Approved models
UL	UL508	E76675	Contact your OMRON representative for information on approved models.
CSA	CSA C22.2 No.14	LR45746
TÜV Rheinland	EN60947-5-1	J50022353, J9950023, J9950959
CCC (CQC)	GB14048.5	2004010305128675

General-purpose/Weather-proof Switches

Ratings

Standard-load Switches

Item	Rated voltage (V)	Non-inductive load (A)				Inductive load (A)
		Resistive load		Lamp load		Inductive load		Motor load
		NC	NO	NC	NO	NC	NO	NC	NO
Basic models, overtravel models	125 VAC 250 VAC 500 VAC	10 10 10		3 2 1.5	1.5 1 0.8	10 10 3		5 3 1.5	2.5 1.5 0.8
Basic models, overtravel models	8 VDC 14 VDC 30 VDC 125 VDC 250 VDC	10 10 6 0.8 0.4		6 6 4 0.2 0.1	3 3 3 0.2 0.1	10 10 6 0.8 0.4		6 6 4 0.2 0.1

Note: 1. The above figures are for steady-state currents.
   2. Inductive loads have a power factor of 0.4 min. (AC) and a time constant of 7 ms max. (DC).
   3. A lamp load has an inrush current of 10 times the steady-state current.
   4. A motor load has an inrush current of 6 times the steady-state current.
   5. For PC loads, use the microload models.

Inrush current	NC	30 A max.
Inrush current	NO	20 A max.

Minimum applicable load	5 VDC 160 mA

Microload Switches (Refer to these ratings before using the product.)

DC 30	0.1
Rated voltage (V)	Rated current (A) - Resistive load
AC 125	0.1

Operation in the following ranges will produce optimum performance.

Recommended load range	5 to 30 VDC 0.5 to 100 mA

Recommended load range	5 VDC 1 mA

Approved Standard Ratings

UL/CSA

Standard-load Switches: A600, NEMA

Rated voltage	Carry current	Current (A)		Volt-amperes (VA)
Rated voltage	Carry current	Make	Break	Make	Break
120 VAC 240 VAC 480 VAC 600 VAC	10 A	60 30 15 12	6 3 1.5 1.2	7,200	720

Microload Switches

0.1 A 125 VAC, 0.1 A 30 VDC

TÜV (EN60947-5-1) (Only models with ground terminals are approved.)

Model	Application category and ratings	Thermal current (Ithe)	Indicator
WL[]	AC-15: 2 A/250 V DC-12: 2 A/48 V	10 A	—
WL01[]	AC-14: 0.1 A/125V DC-12: 0.1 A/48 V	0.5 A	—
WL[]-LE	AC-15: 2 A/250 V	10 A	Neon lamp
WL01[]-LE	AC-14: 0.1 A/125 V	0.5 A	Neon lamp
WL[]-LD	AC-15: 2 A/115 V DC-12: 2 A/48 V	10 A	LED
WL01[]-LD	AC-14: 0.1 A/115 V DC-12: 0.1 A/48 V	0.5 A	LED

Note: As an example, AC-15: 2 A/250 V means the following:

Application category	AC-15
Rated operating current (Ie)	2A
Rated operating voltage (Ue)	250V

Indicator-equipped Switches

Item		Max. rated voltage (V)	Leakage current (mA)
WL-LE	Neon lamp	125 AC	Approx. 0.6
WL-LE	Neon lamp	250 AC	Approx. 1.9
WL-LD	LED	115 AC/DC	Approx. 0.5
WL-LD	LED	10 to 24 AC/DC	Approx. 0.4

Characteristics

Degree of protection		IP67
Durability *1	Mechanical	15,000,000 operations min. *2
Durability *1	Electrical	750,000 operations min. *3
Operating speed		1 mm/s to 1 m/s (in case of WLCA2)
Operating frequency	Mechanical	120 operations/minute min.
Operating frequency	Electrical	30 operations/minute min.
Rated frequency		50/60 Hz
Insulation resistance		100 MΩ min. (at 500 VDC)
Contact resistance		25 mΩ max. (initial value for the built-in switch when tested alone) *6
Dielectric strength	Between terminals of the same polarity	1,000 VAC, 50/60 Hz for 1 min
	Between current-carrying metal part and ground	2,200 VAC, 50/60 Hz for 1 min/Uimp 2.5 kV
	Between each terminal and non- current-carrying metal part	2,200 VAC, 50/60 Hz for 1 min/Uimp 2.5 kV
Rated insulation voltage (Ui)		250 V (EN60947-5-1)
Pollution degree (operating environment)		3 (EN60947-5-1)
Short-circuit protective device (SCPD)		10 A, fuse type gG or gI (IEC60269)
Conditional short-circuit current		100 A (EN60947-5-1)
Conventional enclosed thermal current (Ithe)		10 A, 0.5 A (EN60947-5-1)
Protection against electric shock		Class I
Vibration resistance	Malfunction	10 to 55 Hz, 1.5-mm double amplitude *4
Shock resistance	Destruction	1,000 m/s² max.
Shock resistance	Malfunction	300 m/s² max. *4
Ambient operating temperature		-10°C to +80°C (with no icing) *5
Ambient operating humidity		35% to 95% RH
Weight		Approx. 275 g (in case of WLCA2)

Note. The above figures are initial values.
*1. The values are calculated at an operating temperature of +5°C to +35°C and an operating humidity of 40% to 70%RH. Contact your OMRON sales representative for more detailed information on other operating environments.
*2. Durability is 10,000,000 operations min. for general-purpose models, and for flexible rod models. 500,000 operations min. for weather-proof models.
*3. Durability is 1,000,000 operations min. for all microload models. Weather-proof models are 500,000 operations min.
*4. Except flexible rod models. The shock resistance (malfunction) for microload models is 200 m/s2 max.
*5. For low-temperature models this is –40°C to +40°C (with no icing). For heatresistant models the range is +5°C to +120°C.
*6. For microload models, the contact resistance is 50 mΩ max. (initial value for built-in switch).

Spatter-prevention Switches

Ratings

Screw terminals

Item	Rated voltage (V)	Non-inductive load (A)				Inductive load (A)
		Resistive load		Lamp load		Inductive load		Motor load
		NC	NO	NC	NO	NC	NO	NC	NO
WL[]-LES	125 VAC 250 VAC	10 10		3 2	1.5 1	10 10		5 5	2.5 1.5
WL[]-LDS	115 VAC	10		3	1.5	10		5	2.5
WL[]-LDS	12 VDC 24 VDC 48 VDC	10 6 3		6 4 2	3 3 1.5	10 6 3		6 4 2

Inrush current	NC	30 A max.
Inrush current	NO	20 A max.
Operating temperature		-10°C to +80°C (with no icing)
Operating humidity		35% to 95%RH max.

Approved Standard Ratings

UL/CSA

LE Switches (Neon lamp): A300

Rated voltage	Carry current	Current (A)		Volt-amperes (VA)
Rated voltage	Carry current	Make	Break	Make	Break
120 VAC 240 VAC	10 A	60 30	6 3	7,200	720

LD Switches (LED)

Rated voltage	Carry current
115 VAC	10 A
115 VDC	0.8 A

CCC (GB14048.5)

Model	Application category and ratings
WL[]	AC-15: 2 A/250 V DC-12: 2 A/48 V
WL01[]	AC-14: 0.1 A/125V DC-12: 0.1 A/48 V
WL[]-LE	AC-15: 2 A/250 V
WL01[]-LE	AC-14: 0.1 A/125 V
WL[]-LD	AC-15: 2 A/115 V DC-12: 2 A/48 V
WL01[]-LD	AC-14: 0.1 A/115 V DC-12: 0.1 A/48 V

Note: As an example, AC-15: 2 A/250 V means the following:

Application category	AC-15
Rated operating current (Ie)	2 A
Rated operating voltage (Ue)	250 V

Characteristics

Degree of protection		IP67
Durability *1	Mechanical	15,000,000 operations min. *2
Durability *1	Electrical	750,000 operations min. *3
Operating speed		1 mm/s to 1 m/s (in case of WLCA2)
Operating frequency	Mechanical	120 operations/minute min.
Operating frequency	Electrical	30 operations/minute min.
Rated frequency		50/60 Hz
Insulation resistance		100 MΩ min. (at 500 VDC)
Contact resistance		25 mΩ max. (initial value for the built-in switch when tested alone)
Dielectric strength	Between terminals of the same polarity	1,000 VAC, 50/60 Hz for 1 min
	Between current-carrying metal part and ground	2,200 VAC, 50/60 Hz for 1 min/Uimp 2.5 kV
	Between each terminal and non- current-carrying metal part	2,200 VAC, 50/60 Hz for 1 min/Uimp 2.5 kV
Rated insulation voltage (Ui)		250 V (EN60947-5-1)
Pollution degree (operating environment)		3 (EN60947-5-1)
Short-circuit protective device (SCPD)		10 A, fuse type gG or gI (IEC60269)
Conditional short-circuit current		100 A (EN60947-5-1)
Conventional enclosed thermal current (Ithe)		10 A, 0.5 A (EN60947-5-1)
Protection against electric shock		Class I
Vibration resistance	Malfunction	10 to 55 Hz, 1.5-mm double amplitude
Shock resistance	Destruction	1,000 m/s² max.
Shock resistance	Malfunction	300 m/s² max.
Ambient operating temperature		-10°C to +80°C (with no icing)
Ambient operating humidity		35% to 95%RH
Weight		Approx. 275 g (in case of WLCA2)

Long-life Switches

Ratings

General Ratings (Refer to these ratings before using the product.)

Screw Terminal Switches

Item	Rated voltage (V)	Non-inductive load (A)				Inductive load (A)
		Resistive load		Lamp load		Inductive load		Motor load
		NC	NO	NC	NO	NC	NO	NC	NO
Basic models, overtravel models	115 AC	10		3	1.5	10		5	2.5
Basic models, overtravel models	12 DC 24 DC 48 DC 115 DC	10 6 3 0.8		6 4 2 0.2	3 3 1.5 0.2	10 6 3 0.8		6 4 2 0.2

Inrush current	NC	30 A max.
Inrush current	NO	20 A max.

Direct-wired Connector and Pre-wired Connector Switches

Model	Rated voltage (V)	Non-inductive load (A)				Inductive load (A)
		Resistive load		Lamp load		Inductive load		Motor load
		NC	NO	NC	NO	NC	NO	NC	NO
DC	12 DC	3	3	3	3	3	3	3	3
	24 DC	3	3	3	3	3	3	3	3
	48 DC	3	3	3	3	3	3	3	3
	115 DC	0.8	0.8	0.2	0.2	0.8	0.8	0.2	0.2
AC	115 AC	3	3	3	1.5	3	3	3	2.5

Characteristics

Degree of protection		IP67
Durability *	Mechanical	30,000,000 operations min.
Durability *	Electrical	30,000,000 operations min. (10 mA at 24 VDC, resistive load) 750,000 operations min. (10 A at 115 VAC, resistive load)
Operating speed		1 mm/s to 1 m/s (in case of WLCA2)
Operating frequency	Mechanical	120 operations/minute
Operating frequency	Electrical	30 operations/minute
Rated frequency		50/60 Hz
Insulation resistance		100 MΩ min. (at 500 VDC)
Contact resistance		25 mΩ max. (initial value for the built-in switch when tested alone)
Dielectric strength (50/60 Hz for 1 min)	Between terminals of the same polarity	1,000 VAC (except connector models)
	Between current-carrying metal part and ground	2,200 VAC (1,500 V)
	Between each terminal and non-current- carrying metal part	2,200 VAC (1,500 V)
Vibration resistance	Malfunction	10 to 55 Hz, 1.5-mm double amplitude
Shock resistance	Destruction	1,000 m/s² max.
Shock resistance	Malfunction	300 m/s² max.
Ambient operating temperature		-10°C to +80°C (with no icing)
Ambient operating humidity		35% to 95%RH
Weight		Approx. 275 g (in case of WLCA2)

Note: The figures in parentheses for dielectric strength, are those for connector models.
* The values are calculated at an operating temperature of +5°C to +35°C, and an operating humidity of 40% to 70%RH.Contact your OMRON sales representative for more detailed information on other operating environments.

last update: November 1, 2017

(Unit: mm)

General-purpose Models

Standard Models

Basic

Rotating Lever

For all models WL[] indicates a standard-load model and WL01[] indicates a microload model.

Roller lever R38
WLCA2
WL01CA2

Roller lever R50
WLCA2-7
WL01CA2-7

Roller lever R63
WLCA2-8
WL01CA2-8

Adjustable Roller Lever
WLCA12
WL01CA12

Adjustable Rod Lever (25 to 140 mm)
WLCL
WL01CL

Fork Lever Lock
WLCA32-41 to 44
WL01CA32-41 to 44

Note: Unless otherwise indicated, a tolerance of ±0.4 mm applies to all dimensions.

Please click image to enlarge (open in a new window).

Plunger

For all models WL[] indicates a standard-load model and WL01[] indicates a microload model.

Top Plunger
WLD
WL01D

Horizontal Plunger
WLSD
WL01SD

Top-roller Plunger
WLD2
WL01D2

Horizontal-roller Plunger
WLSD2
WL01SD2

Top-ball Plunger
WLD3
WL01D3

Horizontal-ball Plunger
WLSD3
WL01SD3

Sealed Top-roller Plunger
WLD28
WL01D28

Note: Unless otherwise indicated, a tolerance of ±0.4 mm applies to all dimensions.

Please click image to enlarge (open in a new window).

Flexible Rod

For all models WL[] indicates a standard-load model and WL01[] indicates a microload model.

Coil Spring
WLNJ
WL01NJ

Coil Spring (Multi-wire)
WLNJ-30
WL01NJ-30

Coil Spring (Resin Rod)
WLNJ-2
WL01NJ-2

Steel Wire
WLNJ-S2
WL01NJ-S2

Note: Unless otherwise indicated, a tolerance of ±0.4 mm applies to all dimensions.

Overtravel

General-purpose

For all models WL[] indicates a standard-load model and WL01[] indicates a microload model.

Roller Lever R38
WLH2
WL01H2

Adjustable Rod Lever
WLHL
WL01HL

Adjustable Roller Lever
WLH12
WL01H12

Adjustable Rod Lever
WLHAL4
WL01HAL4

Rod Spring Lever
WLHAL5
WL01HAL5

Note: 1. Unless otherwise indicated, a tolerance of ±0.4 mm applies to all dimensions.
Note: 2. The WL-N high-sensitivity, high-precision models have been integrated into the WL Series.

Note: With WLHAL4, WL01HAL4, WLHAL5, and WL01HAL5, the actuator's tare is large, so depending on the installation direction, they may not be properly reset.Always install so that the actuator is facing downwards.
*1. The operating characteristics of WLH12, and WL01HL12 are measured at the lever length of 38 mm.
*2. The operating characteristics of WLHL, and WL01HL are measured at the rod length of 140 mm.
*3. The operating characteristics of WLHAL4, and WL01HAL4 are measured at the rod length of 380 mm.

OF and RF for WLH12 and WL01H12, with a lever length of 89 mm.

Side-installation Models

For all models WL[] indicates a standard-load model and WL01[] indicates a microload model.

Roller Lever
WLCA2-2N
WL01CA2-2N

Roller Lever
WLCA2-2
WL01CA2-2

Adjustable Roller Lever
WLCA12-2N
WL01CA12-2N

Adjustable Roller Lever
WLCA12-2
WL01CA12-2

Adjustable Rod Lever
WLCL-2N
WL01CL-2N

Adjustable Rod Lever
WLCL-2
WL01CL-2

Note: Unless otherwise indicated, a tolerance of ±0.4 mm applies to all dimensions.

OF and RF for WLCA12-2N and WL01CA12-2N, with a lever length of 89 mm.

Sensor I/O Connector Switches

Direct-wired Connector/Pre-wired Connector Models

Refer to Data Sheet for the connecting cable.

Roller Lever Plungers

WL[] are Standard Models and WL01[] are Microload Models.

Standard Models (WLCA2), Overtravel General-purpose Models (WLH2)

Connector Models

Pre-wired Connector Models

Note: 1. Unless otherwise indicated, a tolerance of ±0.4 mm applies to all dimensions.
2. The models with operation indicators are shown in the above diagrams.

Top-roller Plunger (WLD2)

Direct-wired Connector Models

Pre-wired Connector Models

Note: 1. Unless otherwise indicated, a tolerance of ±0.4 mm applies to all dimensions.
2. The following diagrams are for a indicator-equipped models.

Indicator-equipped Models

Roller Lever
WLCA2-LE/LD
WL01CA2-LE/LD

Note: Unless otherwise indicated, a tolerance of ±0.4 mm applies to all dimensions.

Spatter-prevention Models

Roller Lever (Screw Terminals)
WLCA2-[]S/WL01[]-[]S
WLH2-[]S

Roller Lever (Pre-wired connectors)
WLCA2-[]S-M1J/WL01[]-[]S-M1J
WLH2-[]S-M1J*

* External dimensions are the same even for different core wires.

Sealed Top-roller Plunger (Screw Terminals)
WLD28-[]S

Sealed Top-roller Plunger (Pre-wired connectors)
WLD28-[]S-M1J*

* External dimensions are the same even for different core wires.

Note: 1. Unless otherwise indicated, a tolerance of ±0.4 mm applies to all dimensions.
Note: 2. The WL-N high-sensitivity, high-precision models have been integrated into the WL Series.

Long-life Models

Rotating Lever Models

Roller Lever (Screw Terminals)
WLM[]-LD

Roller Lever (Direct-wired Connectors)
WLM[]-LD[]

Roller Lever (Pre-wired Connectors)
WLM[]-LD[]

Note: 1. Unless otherwise indicated, a tolerance of ±0.4 mm applies to all dimensions.
Note: 2. The WL-N high-sensitivity, high-precision models have been integrated into the WL Series.

Actuators (Levers Only)

Lever: Only rotating lever models are illustrated.

WL-1A100
Standard Lever

WL-1A115
Resin Roller

WL-1A400
Bearing Roller

WL-1A118
Nylon Roller:
Roller Width: 30 mm

WL-1A105
Double Nuts

WL-1A103S
Spatter Prevention

WL-1A200
Lever Length: 50
Roller Width: 15

WL-1A300
Lever Length: 63

WL-2A100

WL-2A111
Resin Roller

WL-2A107
Double Nuts

WL-2A108
Resin Roller

WL-2A122

WL-2A106

WL-2A130

WL-2A104

WL-2A110

WL-2A105

WL-1A106

WL-1A110

WL-4A100

WL-4A201

WL-3A100

WL-3A106
Double Nut

WL-3A108

WL-3A200

WL-3A203

WL-4A112

WL-2A129

WL-5A101
WL-5A100 has a plastic roller

WL-5A103
WL-5A102 has a plastic roller

WL-5A105
WL-5A104 has a plastic roller

Note: 1. Unless otherwise indicated, a tolerance of ±0.4 mm applies to all dimensions.
2. When using the adjustable roller (rod) lever, make sure that the lever is facing downwards. Use caution,as telegraphing (the Switch turns ON and OFF repeatedly due to inertia) may occur.

last update: November 1, 2017

TITLE	DOCUMENT TYPE	SIZE
WL,WLM Series	Product Range Guide	1882 KB

Standard Models

Many Variations in Standard Limit Switches A Wide Range of Models

Environment-resistant Models

Select from Six Types of Environment Resistance

Spatter-prevention Models

Excellent Performance on Arc Welding Lines or Sites with Spattering Cutting Powder Ideal for Welding Sites

Long-life Models

Mechanical Endurance of 30 Million Operations Long-life Models for High-frequency Applications

Features Common to All Models

DPDB Operation

Degree of Protection; IP67

Approved Standards to Aid Export Machines

High-precision Models Available in All Switch Types; Ideal for Position Control

Operation Indicators for Easier Daily Inspections*

Models with Connectors to Reduce Wiring

Approved Standards

General-purpose/Weather-proof Switches

Ratings

Standard-load Switches

Microload Switches (Refer to these ratings before using the product.)

Approved Standard Ratings

UL/CSA

Standard-load Switches: A600, NEMA

Microload Switches

TÜV (EN60947-5-1) (Only models with ground terminals are approved.)

Indicator-equipped Switches

Characteristics

Spatter-prevention Switches

Ratings

Screw terminals

Approved Standard Ratings

UL/CSA

LE Switches (Neon lamp): A300

LD Switches (LED)

CCC (GB14048.5)

Characteristics

Long-life Switches

Ratings

General Ratings (Refer to these ratings before using the product.)

Screw Terminal Switches

Direct-wired Connector and Pre-wired Connector Switches

Characteristics

General-purpose Models

Standard Models

Basic

Rotating Lever

Roller lever R38 WLCA2 WL01CA2

Roller lever R50 WLCA2-7 WL01CA2-7

Roller lever R63 WLCA2-8 WL01CA2-8

Adjustable Roller Lever WLCA12 WL01CA12

Adjustable Rod Lever (25 to 140 mm) WLCL WL01CL

Fork Lever Lock WLCA32-41 to 44 WL01CA32-41 to 44

Plunger

Top Plunger WLD WL01D

Horizontal Plunger WLSD WL01SD

Top-roller Plunger WLD2 WL01D2

Horizontal-roller Plunger WLSD2 WL01SD2

Top-ball Plunger WLD3 WL01D3

Horizontal-ball Plunger WLSD3 WL01SD3

Sealed Top-roller Plunger WLD28 WL01D28

Flexible Rod

Coil Spring WLNJ WL01NJ

Coil Spring (Multi-wire) WLNJ-30 WL01NJ-30

Coil Spring (Resin Rod) WLNJ-2 WL01NJ-2

Steel Wire WLNJ-S2 WL01NJ-S2

Overtravel

General-purpose

Roller Lever R38 WLH2 WL01H2

Adjustable Rod Lever WLHL WL01HL

Adjustable Roller Lever WLH12 WL01H12

Adjustable Rod Lever WLHAL4 WL01HAL4

Rod Spring Lever WLHAL5 WL01HAL5

OF and RF for WLH12 and WL01H12, with a lever length of 89 mm.

Side-installation Models

Roller Lever WLCA2-2N WL01CA2-2N

Roller Lever WLCA2-2 WL01CA2-2

Adjustable Roller Lever WLCA12-2N WL01CA12-2N

Adjustable Roller Lever WLCA12-2 WL01CA12-2

Adjustable Rod Lever WLCL-2N WL01CL-2N

Adjustable Rod Lever WLCL-2 WL01CL-2

Many Variations in Standard Limit Switches
A Wide Range of Models

Excellent Performance on Arc Welding Lines or Sites with Spattering Cutting Powder
Ideal for Welding Sites

Mechanical Endurance of 30 Million Operations
Long-life Models for High-frequency Applications

Roller lever R38
WLCA2
WL01CA2

Roller lever R50
WLCA2-7
WL01CA2-7

Roller lever R63
WLCA2-8
WL01CA2-8

Adjustable Roller Lever
WLCA12
WL01CA12

Adjustable Rod Lever (25 to 140 mm)
WLCL
WL01CL

Fork Lever Lock
WLCA32-41 to 44
WL01CA32-41 to 44

Top Plunger
WLD
WL01D

Horizontal Plunger
WLSD
WL01SD

Top-roller Plunger
WLD2
WL01D2

Horizontal-roller Plunger
WLSD2
WL01SD2

Top-ball Plunger
WLD3
WL01D3

Horizontal-ball Plunger
WLSD3
WL01SD3

Sealed Top-roller Plunger
WLD28
WL01D28

Coil Spring
WLNJ
WL01NJ

Coil Spring (Multi-wire)
WLNJ-30
WL01NJ-30

Coil Spring (Resin Rod)
WLNJ-2
WL01NJ-2

Steel Wire
WLNJ-S2
WL01NJ-S2

Roller Lever R38
WLH2
WL01H2

Adjustable Rod Lever
WLHL
WL01HL

Adjustable Roller Lever
WLH12
WL01H12

Adjustable Rod Lever
WLHAL4
WL01HAL4

Rod Spring Lever
WLHAL5
WL01HAL5

Roller Lever
WLCA2-2N
WL01CA2-2N

Roller Lever
WLCA2-2
WL01CA2-2

Adjustable Roller Lever
WLCA12-2N
WL01CA12-2N

Adjustable Roller Lever
WLCA12-2
WL01CA12-2

Adjustable Rod Lever
WLCL-2N
WL01CL-2N

Adjustable Rod Lever
WLCL-2
WL01CL-2

Roller Lever
WLCA2-LE/LD
WL01CA2-LE/LD

Roller Lever (Screw Terminals)
WLCA2-[]S/WL01[]-[]S
WLH2-[]S

Roller Lever (Pre-wired connectors)
WLCA2-[]S-M1J/WL01[]-[]S-M1J
WLH2-[]S-M1J*

Sealed Top-roller Plunger (Screw Terminals)
WLD28-[]S

Sealed Top-roller Plunger (Pre-wired connectors)
WLD28-[]S-M1J*

Roller Lever (Screw Terminals)
WLM[]-LD

Roller Lever (Direct-wired Connectors)
WLM[]-LD[]

Roller Lever (Pre-wired Connectors)
WLM[]-LD[]