Omron, EE-SPY801 / 802 Series

last update: December 19, 2013

• The mounting position is set with a pedestal.

• The contact surface with the wafer carrier uses a special chemical-resistant fluororesin.

• The unique optical system enables stable detection of almost all wafer-carriers.

• Light modulation effectively reduces external light interference.

• Utilizes talc-free clean cables.

last update: December 19, 2013

last update: September 24, 2012

Models		EE- SPY801/802
Sensing distance (Standard sensing object)		0 to 5 mm ( White paper: 15 × 15 mm², reflection factor: 90%) 0 to 3 mm ( Black paper: 15 × 15 mm², reflection factor: 10%)
Sensing object		Transparent or opaque wafer carriers
Operation indicator		Lit orange when object is detected.
Light source		GaAs infrared LED with a peak wavelength of 940 nm
Supply voltage		12 to 24 VDC ±10%, ripple (p-p): 5% max.
Current consumption		30 mA max.
Control output		NPN open collector: Load power supply voltage: 5 to 24 VDC Load current: 100 mA max. OFF current: 0.5 mA max. 100 mA load current with a residual voltage of 0.8 V max. 40 mA load current with a residual voltage of 0.4 V max.
Response time		5 ms max.
Ambient illumination		3,000 lx max. with incandescent light or sunlight on the surface of the receiver
Ambient temperature range		Operating: - 10 to +55 ° C Storage: - 25 to +65 ° C (with no icing)
Ambient humidity range		Operating: 5% to 85% Storage: 5% to 95% (with no condensation)
Vibration resistance		Destruction: 1 to 500 Hz, 1.0-mm single amplitude or 150 m/s² each in X, Y, and Z directions 3 times and for 11 min. each
Shock resistance		Destruction: 500 m/s² for 3 times each in X, Y, and Z directions
Degree of protection		IEC IP30
Connecting method		Pre-wired (Standard length: 2 m)
Weight (packaged)		Sensor: Approx. 43 g; Accessory (Pedestal): Approx. 9 g
Material	Case	Ethylene tetrafluoro ethylene (ETFE)
Material	Base plate	Polybutylene phthalate (PBT)
Accessories		Instruction Manual

last update: September 24, 2012

Tolerance class IT16 applies to dimensions in this datasheet unless otherwise specified.

Sensors

EE-SPY801

EE-SPY802

Accessories (Order Separately)

Pedestal
EE9-C01

Pedestal
EE9-C02

TITLE	DOCUMENT TYPE	SIZE
EE-SPY801/SPY802 Data Sheet	Catalog	358 KB
EE-SPY801/802 Built-in Amplifier Photomicrosensor Instruction Sheet (ENG/JPN)	Instruction Manual	384 KB

Sensors

EE-SPY801

EE-SPY802

Accessories (Order Separately)

Pedestal
EE9-C01

Pedestal
EE9-C02

Group Sites

Our Partner Sites

Subscribe Our Newsletter

Sensors

EE-SPY801

EE-SPY802

Accessories (Order Separately)

Pedestal EE9-C01

Pedestal EE9-C02

Pedestal
EE9-C01

Pedestal
EE9-C02