Omron, S3D2 Series

High-speed response of 0.1 ms.
Ideal as a two-input Controller.
Lineup includes the S3D2-BK with flip-flop functions convenient for level control, the S3D2-AKD/CKD/CCD with 24-V power supply, and the S3D2-DK/EK with one input/output OFF-delay (two circuits) useful for load control and lamp display
Power source for the Sensor can be supplied up to 200 mA.
Ultra-slim body with 30-mm width.
Multi-function model equipped with timer functions also available.

last update: June 03, 2015

Type		Two inputs/two outputs		Two inputs/one output
Type		Single- function	Single-function (with OFF-delay)	Single-function (AND/OR operation)	Flip-flop function
Model		S3D2-DK	S3D2-EK	S3D2-AK	S3D2-BK
Rated supply voltages		100 to 240 VAC ± 10% 50/60Hz
Power consumption		15 VA max.
Power supply for Sensor		12 VDC ± 10% (includes all variations), 200 mA max. (with short-circuit protection)
Connected Sensor		NPN transistor output (with sinking current of 18 mA min.) or contact output
Input signals	ON	0 to 4 V (5 mA min.)
	OFF	8 to 12 V (2 mA max.)
	Short-circuit current	11 mA TYP (18 mA max.)
	Maximum applied voltage	30 V
Input response time		0.1 ms			IN1 2 ms IN2 2 ms
Output minimum pulse width		10 ms max.
Control output		Relay output SPST-NO × 2 250 VAC, 2A (cos φ = 1 )		Relay output SPDT (shared common) 250 VAC, 3 A (cos φ = 1)
Life expectancy (relay output)	Mechanical	50,000,000 operations min. (switching frequency: 18,000 operations/h)
Life expectancy (relay output)	Electrical	100,000 operations min. (switching frequency: 1,800 operations/h)
Output response time		10 ms max.
Timer functions *		---	OFF-delay 0.1 to 1 s 1 to 10 s selectable	---
Other functions		Signal input reverse		Signal input reverse AND/OR operating mode selection by wiring	Signal input reverse Flip-flop function
Maximum allowable time of momentary power failure		20 ms max.
Ambient temperature range		Operating: -10 to +55°C, Storage: -25 to +65°C (with no icing)
Ambient humidity range		Operating/storage: 35% to 85%
Noise immunity		Operating power supply: 1,500 V (p-p) min.; pulse width: 100 ns, 1 μs; rise time: 1 ns Input/output: 1,200 V (p-p) min.; pulse width: 100 ns, 1 μs; rise time: 1 ns
Dielectric strength		1,500 VAC min. (between power supply terminals and I/O terminals, and between non-current-carrying parts)
Vibration (destruction)		10 to 55 Hz, double-amplitude of 0.75 mm for 2 hours each of the X, Y, and Z directions
Weight		Approx. 140 g

Type		Two inputs/one output
Type		Multi-function		Single- function (AND/OR operation)	Multi-function (24 VDC)
Model		S3D2-CK	S3D2-CC	S3D2-AKD	S3D2-CKD	S3D2-CCD
Rated supply voltages		100 to 240 VAC ± 10% 50/60Hz		24 VDC ± 10%
Power consumption		15 VA max.		2.5 VA max. (excluding Sensor power supply)
Power supply for Sensor		12 VDC ± 10% (includes all variations), 200 mA max. (with short-circuit protection)		24 VDC (supplied from power supply)
Connected Sensor		NPN transistor output (with sinking current of 18 mA min.) or contact output
Input signals	ON	0 to 4 V (5 mA min.)
	OFF	8 to 12 V (2 mA max.)		8 to 30 V (2 mA max.)
	Short-circuit current	11 mA TYP (18 mA max.)
	Maximum applied voltage	30 V
Input response time		0.1 ms
Output minimum pulse width		10 ms max.	0.5 ms max.	10 ms max.		0.5 ms max.
Control output		Relay output SPDT (shared common) 250 VAC, 3 A (cos φ = 1)	NPN open collector output, 30 VDC, 100 mA (NO, NC) Residual voltage (ON) 1.5 V max. Leakage current (OFF): 0.1 mA max.	Relay output SPDT 250 VAC, 3 A (cos φ = 1)		NPN open collector output, 30 VDC, 100 mA (NO, NC) Residual voltage (ON): 1.5 V max. Leakage current (OFF): 0.1 mA max.
Life ex- pectan- cy (relay output)	Mechanical	50,000,000 operations min. (switching frequency: 18,000 operations/h)	---	50,000,000 operations min. (switching frequency: 18,000 operations/h)		---
Life ex- pectan- cy (relay output)	Electrical	100,000 operations min. (switching frequency: 1,800 operations/h)	---	100,000 operations min. (switching frequency: 1,800 operations/h)		---
Output response time		10 ms max.	0.5 ms max.	10 ms max.		0.5 ms max.
Timer functions *		One-shot, ON-delay, and OFF-delay		---	One-shot, ON-delay, and OFF-delay
Timer functions *		0.1 to 1 s 1 to 10 s selectable	0.01 to 0.1 s 0.1 to 1 s selectable	---	0.1 to 1 s 1 to 10 s selectable	0.01 to 0.1 s 0.1 to 1 s selectable
Other functions		Signal input reverse Sync mode selection AND/OR operating mode selection		Signal input reverse AND/OR operating mode selection by wiring	Signal input reverse Sync mode selection AND/OR operating mode selection
Maximum allowable time of momentary power failure		20 ms max.
Ambient temperature range		Operating: -10 to +55°C, Storage: -25 to +65°C (with no icing)
Ambient humidity range		Operating/storage: 35% to 85%
Noise immunity		Operating power supply: 1,500 V (p-p) min.; pulse width: 100 ns, 1 μs; rise time: 1 ns Input/output: 1,200 V (p-p) min.; pulse width: 100 ns, 1 μs; rise time: 1 ns		Operating power supply: 480 V (p-p) min.; pulse width: 100 ns, 1 μs; rise time: 1 ns Input/output: 1,000 V (p-p) min.; pulse width: 100 ns, 1 μs; rise time: 1 ns
Dielectric strength		1,500 VAC min. (between power supply terminals and I/O terminals, and between non-current-carrying parts)		1,500 VAC min. (between power supply terminals and non-current-carrying parts)
Vibration (destruction)		10 to 55 Hz, double-amplitude of 0.75 mm for 2 hours each of the X, Y, and Z directions
Weight		Approx. 140 g

* The timer will not operate in response to input signals received within 50 ms after the Controller power is turned ON.

last update: June 03, 2015

S3D2

* Terminal block screws: M3.5

TITLE	DOCUMENT TYPE	SIZE
S3D2 Data Sheet	Catalog	790 KB
S3D2 Sensor Controller Instruction Sheet (ENG/CHI)	Catalog	536 KB
S3D2 Sensor Controller Instruction Sheet (ENG/JPN)	Catalog	1557 KB
S3D2 Sensor Controller Instruction Sheet (ENG/JPN)	Catalog	876 KB

S3D2

Group Sites

Our Partner Sites

Subscribe Our Newsletter