Omron, D5F Series

• No-contact structure for high reliability.

• Ceramic materials in measuring part for superior resistance to abrasion.

• Two different output types (PNP and NPN) available.

• Less abrasion and damage of mechanical contacts compared to switches with contacts, reducing fluctuation in the output.

• More compact than previous OMRON models: 40% less mass, 15% lighter across the operating width.

Ratings

Power supply voltage	12 to 24 VDC ± 10%, ripple (p-p): 10% max.
Output current	100 mA max.
Power consumption	30 mA max.
Leakage current	0.15 mA max.
Residual voltage	2 V max.

Characteristics

*Durability 1**	Electrical	5,000,000 operations min.
Degree of protection		IP67
*Durability 1**	Mechanical	5,000,000 operations min.
Operating speed		1 μm/s to 0.5 m/s
Max. operating frequency		60 operations/minute max.
Insulation resistance		100 MΩ min. (at 500 VDC) between each terminal and non-current-carrying metal part
Dielectric strength (50/60Hz 1min)		1,100 VAC between each terminal and non-current-carrying metal part
Vibration resistance	Malfunction	10 to 500 Hz, 1.3-mm double amplitude
Shock resistance	Malfunction	300 m/s² max.
Repeat accuracy		1 μm max. *2
*Ambient temperature 3**		Operating: -10 ° C to +60 ° C (with no icing)
Ambient humidity		Operating: 35% to 95%RH
Weight		Switch body: Approx. 50 g; Cord: Approx. 23 g/m

Note:The above figures are initial values.

Note:Durability values are calculated at an operating temperature of +5°C to +35°C, and an operating humidity of 30% to 70%RH. Contact your OMRON sales representative for more detailed information on other operating environments.

Note:Measurements were conducted repeatedly at the same point. The value is 1 μm max. for 200 measurements. For other conditions in detail, contact your OMRON sales representative.

Note:The ambient operating temperature varies depending on the current. Refer to the following Engineering Data.

Deviation in electrical durability after 1,000,000 operations	10 μm max.
Temperature coefficient *	± 50 × 10^×6/ ° C max.

Note:Operating position fluctuation rate for a change of 1°C in the ambient temperature.

last update: September 24, 2012

D5F-2B[]0
D5F-3C[]0

Note:Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions

last update: September 24, 2012

TITLE	DOCUMENT TYPE	SIZE
D5F	Catalog	294 KB

Ratings

Characteristics

D5F-2B[]0
D5F-3C[]0

Group Sites

Our Partner Sites

Subscribe Our Newsletter

Ratings

Characteristics

D5F-2B[]0D5F-3C[]0

D5F-2B[]0
D5F-3C[]0