Omron, S82S Series

• 65 mm depth enables mounting onto control panels with 100 mm depth.

• Inputs: 10.2 to 27.6 VDC (DC input)

• 7.5-W models provide both ±12-V and ±15-V outputs.

• A complete lineup with 10 different models.

• UL and CSA approved.

• RoHS-compliant

Ratings/Characteristics

Item			DC input
Item			3 W	Single output 7.5 W	Dual Output 7.5 W
Efficiency (typical)			60% min.	66% min.	64% min.
Input	Voltage	AC	No
	Voltage	DC	10.2 to 27.6 VDC
	*Current 1**		0.6 A max.	1.2 A max.
Output *2	Voltage adjustment range		±5% *3		None *4
	*Ripple 1**		2% (p-p) max.
	Input variation influence		0.5% max.
	Load variation influence		1.5% max.		+V: 1.5% max. -V: 3% max.
	Temperature variation influence		0.05%/°C max.
Additional function	Overload protection *5		105% min., voltage drop, automatic reset
Other	Ambient operating temperature		Refer to the derating curve in Engineering Data
	Storage temperature		-25 to 65°C
	Ambient operating humidity		25% to 85% (storage humidity: 20% to 90%)
	Dielectric strength		1.5 kVAC for 1 min. (between all input terminals and all output terminals/PE terminals), current off: 10 mA
	Insulation resistance		100 MΩ min. (between all output terminals and all input terminals/PE terminals) at 500 VDC
	Vibration resistance		10 to 55 Hz, 0.375-mm single amplitude for 2 hours each in X, Y, and Z directions
	Shock resistance		294 m/s², 3 times each in ±X, ±Y, ±Z directions
	Output indicator		Yes (color: green)
	Approved standards		Refer to List of Certified Models for details.
	Weight		150 g max.

*1. A 100% load for rated input voltage.
*2. Output characteristics are measured at the power supply output terminals.
*3. If the output voltage adjuster (V.ADJ) is turned, the voltage will increase by more than 50% of the voltage adjustment
range. When adjusting the output voltage, confirm the actual output voltage from the Power Supply and be sure that
the load is not damaged.
*4. The settings for the output voltage must be within the following range:
+V: ±1% of the rated value
–V: ±5% of the rated value
*5. Refer to Overload Protection on Data Sheet for details.

S82S-73[][] (3 W)
S82S-77[][] (7.5 W)

* A distance of 7.3 mm is required between the model and the mounting surface when the mounting bracket provided
with the model is used.
Note: If more than one Power Supply is installed in a row, keep a distance of 20 mm min. (L = 20 mm min.) between each
adjacent Power Supply.

Accessories

Mounting Bracket

Used when not mounting the Power Supply directly on the DIN Rail.

DIN Rail (Order Separately)

Mounting Rail (Material: Aluminum)

PFP-100N
PFP-50N

Note: The values shown in parentheses are for the PFP-50N.

PFP-100N2

TITLE	DOCUMENT TYPE	SIZE
S82S	Catalog	1002 KB
S82S Switching Power Supply (ENG/JPN)	Manual	741 KB

Ratings/Characteristics

S82S-73[][] (3 W)
S82S-77[][] (7.5 W)

Accessories

Mounting Bracket

DIN Rail (Order Separately)

Mounting Rail (Material: Aluminum)

Group Sites

Our Partner Sites

Subscribe Our Newsletter

Ratings/Characteristics

S82S-73[][] (3 W) S82S-77[][] (7.5 W)

Accessories

Mounting Bracket

DIN Rail (Order Separately)

Mounting Rail (Material: Aluminum)

S82S-73[][] (3 W)
S82S-77[][] (7.5 W)