An innovative new lock structure makes connection extremely simple. The lock mechanism is internal, so it will no longer become jammed by sputtered fluids or dust. Also, the use of a movable lock bolt makes it possible to connect the Smartclick XS5 to a screw-type M12 connector.
All combinations are connectable.
A positive clicking feel tells you for sure that the Connector is securely locked.
The Smartclick XS5 has the industry's shortest locking rotation of 1/8th of a turn. There's no need to keep track of locking torque, and this greatly reduces time and effort when wiring.
By using a bayonet mechanism, which is a common locking method, the Smartclick XS5 eliminates any concerns about loosening.
| Rated current | 4 A |
|---|---|
| Rated voltage | 250 VDC |
| Contact resistance (connector) | 40 mΩ max. (20 mV max., 100 mA max.) |
| Insulation resistance | 1,000 MΩ min. (at 500 VDC) |
| Dielectric strength (connector) | 1,500 VAC for 1 min (leakage current: 1 mA max.) |
| Degree of protection | IP67 (IEC60529) |
| Insertion tolerance | 50 times min. |
| Lock strength | Tensile: 100 N/15 s, Torsion: 1 N·m/15 s |
| Cable holding strength | Tensile: 100 N/15 s, Torsion: 1 N·m/15 s (for cable diameter of 6 mm) *2 |
| Lock operating force | 0.1 to 0.25 N·m |
| Ambient operating temperature range | -25 to 70° *3 |
| Ambient humidity range | 20% to 85% |
| Number of pressure-weld repairs *1 | 10 times max. (Limited to the same external diameter and wire diameter.) |
*1. Only XS5C/G (IDC models)
*2. Refer to product specifications for details.
*3. Use the robot cable within a temperature range between 0°C and 70°C to prevent the wires inside the cable from being broken when bending it.
| Model | XS5F/H/W | XS5R | XS5M/P |
XS5C/G (Crimping, Soldering) |
XS5C/G (Screw-on) |
XS5C/G (IDC models) |
|
|---|---|---|---|---|---|---|---|
| Contacts | Material |
Phosphor bronze |
Phosphor bronze or Brass |
Phosphor bronze |
Brass |
Phosphor bronze or Brass |
Phosphor bronze |
| Finish | Nickel base, 0.4-μm gold plating |
Nickel base, 0.15-μm gold plating |
|||||
| Fixtures | Nickel-plated zinc alloy | ||||||
| Fixtures (Lock) * | Stainless | ||||||
| Pin block | PBT resin (UL94V-0) | ||||||
| O-ring | Rubber | ||||||
| Overmolding/Cover | Soft PBT resin (UL94V-0) | --- | PBT resin (UL94V-0) | ||||
| Cable |
Fire-retardant, Robot cable |
UL AWM2464 CL3, 6 mm dia., AWG20 (0.5mm2) Structure: 0.08 mm/110 wires |
--- | ||||
|
Oil-resistant Polyurethane cable |
6 mm dia. AWG20 (0.5mm2) Structure: 0.12 mm/45 wires |
--- | |||||
|
Spatter- resistant Cable |
6.6 mm dia. AWG20 (0.5mm2) Structure: 0.08 mm/100 wires |
--- | |||||
|
Oil-resistant Polyurethane Robot cable |
4.7 mm dia. AWG23 (0.3mm2) Structure: 0.08 mm/ 60 wires |
--- | |||||
| Seal resin | --- |
Epoxy resin (UL94V-0) |
--- | ||||
| Power supply wires | --- |
UL1007 AWG20 |
--- | ||||
* Only plug
| No. of poles | 4 poles | |
|---|---|---|
| DC type | Male (plug) contacts |
|
| Female (socket) contacts |
|
|
| OMRON model no. | Smartclick Plug Connectors | M12 Plug Connectors | |
|---|---|---|---|
|
XS5H, XS5G, XS5W (plug side), XS5R (plug side), XS5M |
XS2H, XS2G, XS2W (plug side), XS2R (plug side), XS2M |
||
|
Smartclick Socket Connectors |
XS5F, XS5C, XS5W (socket side), XS5R (socket side), XS5P |
◎ | ○ |
|
M12 Socket Connectors |
XS2F, XS2C, XS2W (socket side), XS2R (socket side), XS2P |
○ | ○ |
◎: Connected by twisting.
○: Connected by screwing.
Note: The XS[]M and XS[]P cannot mate with each other.
Note: Oil-resistant Polyurethane Cables (XS5W-D42[]-[]81-P) and Spatter-resistant Cable (XS5W-D421-[]81-SA)
have black covers.
Fire-retardant, Robot cable (XS5W-D42[]-[]81-F) have warm gray covers.
Note: Oil-resistant Polyurethane Cables (XS5F-D42[]-[]80-P) and Spatter-resistant Cable (XS5F-D421-[]80-SA) have black
covers. Fireretardant, Robot cable (XS5F-D42[]-[]80-F) have warm gray covers.
Note: Oil-resistant Polyurethane Cables (XS5H-D42[]-[]80-P) and Spatter-resistant Cable (XS5H-D421-[]80-SA) have black
covers. Fireretardant, Robot cable (XS5H-D42[]-[]80-F) have warm gray covers.
* A special tool must be used for crimping. For details, refer to Catalog.
* A special tool must be used for crimping. For details, refer to Catalog.
Note:
1. The panel cutout dimension is the same for Front-locking and Rear-locking Sockets.
2. Rotational positioning is not possible for connector rotation.
Note:
1. The panel cutout dimension is the same for Front-locking and Rear-locking Sockets.
2. Rotational positioning is not possible for connector rotation.
Automation Systems 
Motion & Power Solutions 
Safety, Vision and IDENT 
Sensing Solutions 
Control Components 
Switching & Accessories 
Switchgear and Trolley Systems 
Process Weighing 
LED Lighting 
Omron
Mitsubishi
Delta
Autonics
Inno
Panasonic
Novotechnik
Orientalmotor
Microscan
IPA
Technomech
Intech
Honeywell
IOT & Traceability
Project & Panel Engg.
Application Case Studies
Solutions by Industry
Solutions by Process
Solutions by Product
Youtube Videos
Corporate Information
Company Profile
Quality Policy
Mission Statement
Chairman's Message
Intech Group Companies
