Omron, XW5T-S Series

New Value For Control Panels

Control Panels: The Heart of Manufacturing Sites.
Evolution in control panels results in large evolution in production facilities.
And if control panel design, control panel manufacturing processes, and human interaction with them are innovated, control panel manufacturing becomes simpler and takes a leap forward.
OMRON will continue to achieve a control panel evolution and process innovation through many undertakings starting with the shared Value Design for Panel *1 concept for the specifications of products used in control panels.

*1 Value Design for Panel
Our shared Value Design for Panel (herein after referred to as "Value Design") concept for the specifications of products used in control panels will create new value to our customer’s control panels.
Combining multiple products that share the Value Design concept will further increase the value provided to control panels.

OMRON Products from Terminal Blocks to Controllers Let You Efficiently Build Control Panels

Control panels can be downsized by using the many OMRON Controllers,
Power Supply, Relays, and other products that connect to the Terminal Blocks.
We will help you downsize control panels with OMRON control panel components that connect to terminal blocks.
We can also help you reduce terminal preparation and wiring work and reduce stock management work by maximizing the use of the components to unify tools and wires.

Everything from DIN Track Terminal Blocks to Controllers Available with Push-in Plus Terminal Blocks

Push-In Plus Terminal Blocks for Easy Wiring

Just Insert Wires: No Tools Required Now you can use Push-In Plus terminal blocks to reduce the time and work involved in wiring.

Greatly Reduce Wiring Work with Push-In Plus Terminal Blocks

Easy to Insert

OMRON’s Push-In Plus terminal blocks are as easy as inserting to an earphone jack. They help reduce the work load and improve wiring quality.

Held Firmly in Place

Even though less insertion force is required, the wires are held firmly in place. The advanced mechanism design technology and manufacturing technology produced a spring that ensures better workability and reliability.

No Retightening Required

The retightening that is required for screw terminal blocks is not required for Push-in Plus terminal blocks.
Your work load is reduced not only when wiring, but also for inspections, delivery (shipping), and maintenance.

Wiring Possible with Stranded Wires

You can insert wires with pin terminals or ferrules, or you can also insert solid wires or stranded wires.

When a stranded wire is used: 3 Steps.

Screwdriver Held in Place to Free Both Your Hands

Optimized shape to hold the screwdriver was created by the resin parts and the spring.
Work goes smoothly when connecting stranded wires directly to the terminal because it’s easier to aim at the desired terminal.

Safety

The structure provides finger protection so that your fingers never touch conductive parts.

Minimum Width of 3.5 mm to Help Downsize Control Panels

Terminal blocks are the most numerous, most space-eating components in control panels. OMRON has achieved the top class

*According to OMRON investigation in March 2017.

Web Service That Helps Reduce Work in Selecting Terminal Blocks and Designing

• If you use OMRON’s website, you can easily select the Terminal Blocks to connect to the control panel
components that you have selected.
• You can easily confirm the dimensions of the Terminal Blocks that you have selected.
• And you can easily create Terminal Block parts lists (BOMs) and marking formats.

Take a Look Now! (www.ia.omron.com/solution/panel/)

Ratings and Specifications

Feed Through Terminal Blocks

Model		XW5T-S2.5-1.1-1(BL)	XW5T-S4.0-1.1-1(BL)	XW5T-S6.0-1.1-1(BL)	XW5T-S10-1.1-1(BL)
Appearance and internal wiring		1 tier, 1:1	1 tier, 1:1	1 tier, 1:1	1 tier, 1:1
Applicable wire sizes	NOMINAL CROSS SECTION	2.5 mm²	4.0 mm²	6.0 mm²	10 mm²
	Minimum conductor cross section solid	0.14 mm²	0.14 mm²	0.2 mm²	0.5 mm²
	Maximum conductor cross section solid	4.0 mm²	6.0 mm²	10 mm²	16 mm²
	Minimum conductor cross section fine stranded	0.14 mm²	0.14 mm²	0.2 mm²	0.5 mm²
	Maximum conductor cross section fine stranded	4.0 mm²	6.0 mm²	10 mm²	16 mm²
	Minimum conductor cross section (flex., stranded) with cable end sleeve	0.5 mm²	0.5 mm²	0.5 mm²	0.5 mm²
	Maximum conductor cross section (flex., stranded) with cable end sleeve	2.5 mm²	4.0 mm²	6.0 mm²	10 mm²
	Conductor cross section AWG	AWG26 to AWG12	AWG26 to AWG10	AWG24 to AWG8	AWG20 to AWG6
	Wire strip length	9 mm	9 mm	11 mm	13 mm
Tightening torque		0.4 Nm	0.5 Nm	1.2 Nm	1.2 Nm
Dimensions		5×48.2×56	6×48.2×56	8×48.2×56	10×48.2×56.2
Mounting rail		TH35	TH35	TH35	TH35
IEC rated voltage		1,000 V	1,000 V	1,000 V	1,000 V
IEC rated current		24 A	32 A	41 A	57 A
Rated impulse voltage		8 kV	8 kV	8 kV	8 kV
UL rated voltage		600 V	600 V	600 V	600 V
UL rated current		20 A	30 A	50 A	65 A
End Covers		XW5E-S2.5-1.1-1	XW5E-S2.5-1.1-1	XW5E-S2.5-1.1-1	XW5E-S2.5-1.1-1
Applicable nameplates		XW5Z-S2.5LB	XW5Z-S4.0LB[]	XW5Z-S6.0LB[]	---
Applicable Short Bars		XW5S-S4.0-[] ([]: Poles = 2, 3, 4, 5 or 10)	XW5S-S4.0-[] ([]: Poles = 2, 3, 4, 5 or 10)	XW5S-S6.0-[] ([]: Poles = 2,3, 4, or 5)	XW5S-S10-[] ([]: Poles = 2)

Model		XW5T-S16-1.1-1(BL)	XW5T-S35-1.1-1(BL)	XW5T-S70-1.1-1(BL)	XW5T-S150-1.1-1(BL)
Appearance and internal wiring		1 tier, 1:1	1 tier, 1:1	1 tier, 1:1	1 tier, 1:1
Applicable wire sizes	NOMINAL CROSS SECTION	16 mm²	35 mm²	70 mm²	150 mm²
	Minimum conductor cross section solid	1.5 mm²	10 mm²	---	---
	Maximum conductor cross section solid	16 mm²	10 mm²	---	---
	Minimum conductor cross section fine stranded	4.0 mm²	10 mm²	10 mm²	35 mm²
	Maximum conductor cross section fine stranded	25 mm²	35 mm²	70 mm²	150 mm²
	Minimum conductor cross section (flex., stranded) with cable end sleeve	1.5 mm²	---	---	---
	Maximum conductor cross section (flex., stranded) with cable end sleeve	16 mm²	---	---	---
	Conductor cross section AWG	AWG14 to AWG4	AWG10 to AWG 1/0	AWG6 to AWG 2/0	AWG 2/0 to 350 kcmil
	Wire strip length	15 mm	18 mm	24 mm	30 mm
Tightening torque		2 Nm	3 Nm	6 Nm	10 Nm
Dimensions		12×58.5×62	16×63×75.1	24×75.2×88.7	28×96× 10⁶.1
Mounting rail		TH35	TH35	TH35	TH35
IEC rated voltage		1,000 V	800 V	800 V	1,000 V
IEC rated current		76 A	124 A	179 A	309 A
Rated impulse voltage		8 kV	8 kV	8 kV	8 kV
UL rated voltage		600 V	600 V	600 V	600 V
UL rated current		85 A	150 A	175 A	335 A
End Covers		XW5E-S16
Applicable nameplates		---	---	---	---
Applicable Short Bars		XW5S-S16-[] ([]: Poles = 2)	---	---	---

Model		XW5T-S2.5-1.1-2	XW5T-S2.5-1.1-2V	XW5T-S4.0-1.2-1(BL)
Appearance and internal wiring		2 tier, 1:1	2 tier, 1:1	1 tier, 1:2
Applicable wire sizes	NOMINAL CROSS SECTION	2.5 mm²	2.5 mm²	4.0 mm²
	Minimum conductor cross section solid	0.2 mm²	0.2 mm²	0.14 mm²
	Maximum conductor cross section solid	4.0 mm²	4.0 mm²	6.0 mm²
	Minimum conductor cross section fine stranded	0.14 mm²	0.14 mm²	0.14 mm²
	Maximum conductor cross section fine stranded	2.5 mm²	2.5 mm²	6.0 mm²
	Minimum conductor cross section (flex., stranded) with cable end sleeve	---	---	0.5 mm²
	Maximum conductor cross section (flex., stranded) with cable end sleeve	---	---	4.0 mm²
	Conductor cross section AWG	AWG22 to AWG12	AWG22 to AWG12	AWG26 to AWG10
	Wire strip length	8 mm	8 mm	9 mm
Tightening torque		0.4 Nm	0.4 Nm	0.5 Nm
Dimensions		5×65.8×71.4	5×65.8×71.4	6×58×56
Mounting rail		TH35	TH35	TH35
IEC rated voltage		500 V	500 V	500 V
IEC rated current		24 A	24 A	32 A
Rated impulse voltage		6 kV	6 kV	6 kV
UL rated voltage		600 V	600 V	300 V
UL rated current		20 A	20 A	30 A
End Covers		XW5E-S2.5N	XW5E-S2.5N	XW5E-S4.0-1.2-1
Applicable nameplates		XW5Z-2.5LB[]	XW5Z-2.5LB[]	XW5Z-4.0LB[]
Applicable Short Bars		XW5S-S2.5-[]N ([]: Poles = 2, 3, 4, 5, or 10)	XW5S-S2.5-[]N ([]: Poles = 2, 3, 4, 5, or 10)	XW5S-S4.0-[] ([]: Poles = 2, 3, 4, 5, or 10)

Model		XW5T-S4.0-2.2-1(BL)	XW5T-S4.0-1.1-2	XW5T-S4.0-1.1-2V
Appearance and internal wiring		1 tier, 2:2	2 tier, 1:1	2 tier, 1:1
Applicable wire sizes	NOMINAL CROSS SECTION	4.0 mm²	4.0 mm²	4.0 mm²
	Minimum conductor cross section solid	0.14 mm²	0.14 mm²	0.14 mm²
	Maximum conductor cross section solid	6.0 mm²	6.0 mm²	6.0 mm²
	Minimum conductor cross section fine stranded	0.14 mm²	0.14 mm²	0.14 mm²
	Maximum conductor cross section fine stranded	6.0 mm²	6.0 mm²	6.0 mm²
	Minimum conductor cross section (flex., stranded) with cable end sleeve	0.5 mm²	0.5 mm²	0.5 mm²
	Maximum conductor cross section (flex., stranded) with cable end sleeve	4.0 mm²	4.0 mm²	4.0 mm²
	Conductor cross section AWG	AWG26 to AWG10	AWG26 to AWG10	AWG26 to AWG10
	Wire strip length	9 mm	9 mm	9 mm
Tightening torque		0.5 Nm	0.5 Nm	0.5 Nm
Dimensions		6×69×58	6×73×75	6×73×75
Mounting rail		TH35	TH35	TH35
IEC rated voltage		500 V	800 V	800 V
IEC rated current		32 A	32 A	32 A
Rated impulse voltage		6 kV	8 kV	8 kV
UL rated voltage		300 V	300 V	300 V
UL rated current		30 A	30 A	30 A
End Covers		XW5E-S4.0-2.2-1	XW5E-S4.0-1.1-2	XW5E-S4.0-1.1-2
Applicable nameplates		XW5Z-4.0LB[]	XW5Z-4.0LB[]	XW5Z-4.0LB[]
Applicable Short Bars		XW5S-S4.0-[] ([]: Poles = 2, 3, 4, 5, or 10)	XW5S-S4.0-[] ([]: Poles = 2, 3, 4, 5, or 10)	XW5S-S4.0-[] ([]: Poles = 2, 3, 4, 5, or 10)

Grounding Terminal Blocks

Model		XW5G-S2.5-1.1-1	XW5G-S4.0-1.1-1	XW5G-S6.0-1.1-1	XW5G-S10-1.1-1
Appearance and internal wiring		1 tier, 1:1	1 tier, 1:1	1 tier, 1:1	1 tier, 1:1
Applicable wire sizes	NOMINAL CROSS SECTION	2.5 mm²	4.0 mm²	6.0 mm²	10 mm²
	Minimum conductor cross section solid	0.14 mm²	0.14 mm²	0.2 mm²	0.5 mm²
	Maximum conductor cross section solid	4.0 mm²	6.0 mm²	10 mm²	16 mm²
	Minimum conductor cross section fine stranded	0.14 mm²	0.14 mm²	0.2 mm²	0.5 mm²
	Maximum conductor cross section fine stranded	4.0 mm²	6.0 mm²	10 mm²	16 mm²
	Minimum conductor cross section (flex., stranded) with cable end sleeve	0.5 mm²	0.5 mm²	0.5 mm²	0.5 mm²
	Maximum conductor cross section (flex., stranded) with cable end sleeve	2.5 mm²	4.0 mm²	6.0 mm²	10 mm²
	Conductor cross section AWG	AWG26 to AWG12	AWG26 to AWG10	AWG24 to AWG8	AWG20 to AWG6
	Wire strip length	9 mm	9 mm	11 mm	13 mm
Tightening torque		0.4 Nm	0.5 Nm	1.2 Nm	1.2 Nm
Dimensions		5×48.2×56	6×48.2×56	8×48.2×56	10×48.2×56.2
Mounting rail		TH35	TH35	TH35	TH35
IEC rated voltage		1,000 V	1,000 V	1,000 V	1,000 V
IEC rated current		---	---	---	---
Rated impulse voltage		8 kV	8 kV	8 kV	8 kV
UL rated voltage		600 V	600 V	600 V	600 V
UL rated current		---	---	---	---
End Covers		XW5E-S2.5	XW5E-S2.5	XW5E-S2.5	XW5E-S2.5
Applicable nameplates		XW5Z-S2.5LB[]	XW5Z-S4.0LB[]	XW5Z-S6.0LB[]	---
Applicable Short Bars		---	---	---	---

Model		XW5G-S16-1.1-1	XW5G-S35-1.1-1	XW5G-S70-1.1-1
Appearance and internal wiring		1 tier, 1:1	1 tier, 1:1	1 tier, 1:1
Applicable wire sizes	NOMINAL CROSS SECTION	16 mm²	35 mm²	70 mm²
	Minimum conductor cross section solid	1.5 mm²	10 mm²	---
	Maximum conductor cross section solid	16 mm²	35 mm²	---
	Minimum conductor cross section fine stranded	4.0 mm²	10 mm²	10 mm²
	Maximum conductor cross section fine stranded	25 mm²	35 mm²	70 mm²
	Minimum conductor cross section (flex., stranded) with cable end sleeve	1.5 mm²	---	---
	Maximum conductor cross section (flex., stranded) with cable end sleeve	16 mm²	---	---
	Conductor cross section AWG	AWG14 to AWG4	AWG10 to AWG2	AWG6 to AWG 2/0
	Wire strip length	15 mm	20 mm	24 mm
Tightening torque		2 Nm	3 Nm	6 Nm
Dimensions		12×58.5×62	16×63×75.1	24×75.2×88.7
Mounting rail		TH35	TH35	TH35
IEC rated voltage		1000 V	800 V	800 V
IEC rated current		---	---	---
Rated impulse voltage		8 kV	8 kV	8 kV
UL rated voltage		600 V	600 V	600 V
UL rated current		---	---	---
End Covers		XW5E-S16	---	---
Applicable nameplates		---	---	---
Applicable Short Bars		---	---	---

Model		XW5G-S4.0-1.2-1	XW5G-S4.0-2.2-1	XW5G-S4.0-1.1-2
Appearance and internal wiring		1 tier, 1:2	1 tier, 2:2	2 tiers, 1:1
Applicable wire sizes	NOMINAL CROSS SECTION	4.0 mm²	4.0 mm²	4.0 mm²
	Minimum conductor cross section solid	0.14 mm²	0.14 mm²	0.14 mm²
	Maximum conductor cross section solid	6 mm²	6 mm²	6 mm²
	Minimum conductor cross section fine stranded	0.14 mm²	0.14 mm²	0.14 mm²
	Maximum conductor cross section fine stranded	6 mm²	6 mm²	6 mm²
	Minimum conductor cross section (flex., stranded) with cable end sleeve	0.5 mm²	0.5 mm²	0.5 mm²
	Maximum conductor cross section (flex., stranded) with cable end sleeve	4 mm²	4 mm²	4 mm²
	Conductor cross section AWG	AWG26 to AWG10	AWG26 to AWG10	AWG26 to AWG10
	Wire strip length	9 mm	9 mm	9 mm
Tightening torque		0.5 Nm	0.5 Nm	0.5 Nm
Dimensions		6×58×56	6×69×58	6×73×75
Mounting rail		TH35	TH35	TH35
IEC rated voltage		500 V	500 V	800 V
IEC rated current		---	---	---
Rated impulse voltage		6 kV	6 kV	8 kV
UL rated voltage		300 V	300 V	300 V
UL rated current		---	---	---
End Covers		XW5E-S4.0-1.2-1	XW5E-S4.0-2.2-1	XW5E-S4.0-1.1-2
Applicable nameplates		XW5Z-4.0LB[]	XW5Z-4.0LB[]	XW5Z-4.0LB[]
Applicable Short Bars		---	---	---

Terminal Blocks with Fuses

Model		XW5T-S4.0-FU5	XW5T-S4.0-FU6
Appearance and internal wiring		1 tier, 1:1	1 tier, 1:1
Applicable wire sizes	NOMINAL CROSS SECTION	4.0 mm²	4.0 mm²
	Minimum conductor cross section solid	0.5 mm²	0.5 mm²
	Maximum conductor cross section solid	6 mm²	6 mm²
	Minimum conductor cross section fine stranded	0.5 mm²	0.5 mm²
	Maximum conductor cross section fine stranded	4 mm²	4 mm²
	Minimum conductor cross section (flex., stranded) with cable end sleeve	---	---
	Maximum conductor cross section (flex., stranded) with cable end sleeve	---	---
	Conductor cross section AWG	AWG22 to AWG10	AWG22 to AWG10
	Wire strip length	8 mm	8 mm
Tightening torque		0.5 Nm	0.5 Nm
Dimensions		8×77.2×62	10×77.2×62
Mounting rail		TH35	TH35
IEC rated voltage		800 V	800 V
IEC rated current		6.3 A	10 A
Rated impulse voltage		8 kV	8 kV
UL rated voltage		600 V	600 V
UL rated current		15 A	15 A
End Covers		---	---
Applicable nameplates		---	---
Applicable Short Bars		---	---

Technical Information for XW5T-S4.0-FU5, XW5T-S4.0-FU6

The fuse blocks of this type have a flip top disconnect lever. It accepts miniature fuses of 5×20, 5×25 and 5×30 mm (terminal width: 8 mm) or 6.3×32 mm (terminal width: 10 mm). The hinged lever has latch points both in the open and in the closed position, and can be sealed.
Depending on the application and the installation method, the circumstances for increased temperature must be checked in the closed fuse holders. Higher ambient temperatures are an additional load for the fuse inserts. Therefore, the reduction of the rated current must be considered accordingly in these applications.

Disconnect Terminal Blocks

Model		XW5T-S4.0-KD
Appearance and internal wiring		1 tier, 1:1
Applicable wire sizes	NOMINAL CROSS SECTION	4.0 mm²
	Minimum conductor cross section solid	0.14 mm²
	Maximum conductor cross section solid	6 mm²
	Minimum conductor cross section fine stranded	0.14 mm²
	Maximum conductor cross section fine stranded	6 mm²
	Minimum conductor cross section (flex., stranded) with cable end sleeve	0.5 mm²
	Maximum conductor cross section (flex., stranded) with cable end sleeve	4 mm²
	Conductor cross section AWG	AWG26 to AWG10
	Wire strip length	9 mm
Tightening torque		0.5 Nm
Dimensions		6×58×58
Mounting rail		TH35
IEC rated voltage		500 V
IEC rated current		20 A
Rated impulse voltage		6 kV
UL rated voltage		300 V
UL rated current		16 A
End Covers		XW5E-S4.0-1.2-1
Applicable nameplates		XW5Z-S4.0LB[]
Applicable Short Bars		XW5S-S4.0-[]

Short Bar

Model	XW5S-S2.5-[]	XW5S-S4.0-[]	XW5S-S6.0-[]	XW5S-S10-[]	XW5S-S16-[]
IEC rated voltage	600 V			1,000 V
IEC rated current	20 A	30 A	50 A	57 A	76 A
UL rated voltage	600 V
UL rated current	20 A	30 A	50 A	65 A	85 A
Compliant standards	UL
Compliant standards	IEC60947-7-1

Characteristics

Operating temperature range	40 to 60°C (with no condensation or icing)
Insulating material	PA
Flammability rating according to UL 94	V0
Operating humidity	range 5% to 95%
Compliant standards	cULus (UL 1059), IEC 60947-7-1 and IEC 60947-7-2
Vibration resistance	5 to 150 Hz 0.964 (m/s²)²/Hz
Shock resistance	50 m/s² 30 ms according EN 61373