Omron, HL-5000 Series

• The Head, Box, and Cover mate with ridged surfaces to maintain strength.

• A unique Head structure provides a large OT for smooth operation.

• Easy-to-wire conduit opening design.

• Ideal for application in printing machines, forming machines,and light machines.
(High Switches with high sealing characteristics, such as WL or D4C Switches, in locations subject to oil, water, or precipitation.)

• Models with grounding terminals conform to the CE marking.

• Approved by CCC (Chinese standard). (Ask your OMRON representative for information on approved models.)

Ratings

Rated voltage	Non-inductive load (A)				Inductive load (A)
	Resistive load		Lamp load		Inductive load		Motor load
	NC	NO	NC	NO	NC	NO	NC	NO
125 VAC 250 VAC	5 5		1.5 1	0.7 0.5	3 3		2 1.5	1 0.8
12 VDC 24 VDC 125 VDC 250 VDC	5 5		3 3		4 4		3 3
12 VDC 24 VDC 125 VDC 250 VDC	0.4 0.4	0.2 0.2	-		-		-

Note:
1. The above figures are for steady-state currents.
2. Inductive loads have a power factor of 0.4 min. (AC) and a time constant of 7 ms max. (DC).
3. Lamp load has an inrush current of 10 times the steady-state current.
4. Motor load has an inrush current of 6 times the steady-state current.

Inrush current	NC	24 A max.
Inrush current	NO	12 A max.

Characteristics

Degree of protection		IP65
Durability *	Mechanical	10,000,000 operations min. (under rated conditions)
Durability *	Electrical	See the following Electrical Durability.
Operating speed		5 mm/s to 0.5 m/s
Operating frequency	Mechanical	120 operations/min
Operating frequency	Electrical	30 operations/min
Insulation resistance		100 MΩ min. (at 500 VDC)
Contact resistance		25 mΩ max. (initial value)
Dielectric strength		1,000 VAC, 50/60 Hz for 1 min between terminals of the same polarity
		1,500 VAC, 50/60 Hz for 1 min between current-carrying metal parts and ground
		1,500 VAC, 50/60 Hz for 1 min between each terminal and non-current-carrying metal part
Rated frequency		50/60 Hz
Vibration resistance	Malfunction	10 to 55 Hz, 1.5-mm double amplitude
Shock resistance	Destruction	1,000 m/s² max.
Shock resistance	Malfunction	300 m/s² max.
Ambient operating temperature		-5°C to +65°C (with no icing)
Ambient operating humidity		35% to 95%RH
Weight		Approx. 130 to 190 g

Note:The above figures are initial values.

Note:The above characteristics may vary depending on the model. For further details, contact your OMRON sales representative.

Note:The values are calculated at an operating temperature of +5°C to +35°C, and an operating humidity of 40% to 70%RH. Contact your OMRON sales representative for more detailed information on other operating environments.