Omron, SHL Series

• Approved by EN, UL, CSA, and CCC (Chinese standard). (Ask your OMRON representative for information on approved models.)

• Incorporates a switch with a durable coil spring in a tough, highprecision case.

• Compact and uses a single basic switch for applications where strength is required.

• Models for microloads and models with operation indicators added to series.

• Terminal protective cover can be switched to wire cable from either the left or right.

• Sealing characteristics that meet IEC IP67 degree of protection.

Note:The above figures are for steady-state currents.

Note:Inductive loads have a power factor of 0.4 min. (AC) and a time constant of 7 ms max. (DC).

Note:Lamp load has an inrush current of 10 times the steady-state current.

Note:Motor load has an inrush current of 6 times the steady-state current.

Degree of protections		IP67 (EN60947-5-1)
Durability	Mechanical	10,000,000 operations min.
Durability	Electrical	500,000 operations min.
Operating speed		0.1 mm/s to 0.5 m/s (hinge lever models)
Operating frequency	Mechanical	120 operations/min
Operating frequency	Electrical	30 operations/min
Rated frequency		50/60 Hz
Insulation resistance		100 MΩ min. (at 500 VDC)
Contact resistance		15 mΩ max. (initial value for the built-in switch when tested alone)
Dielectric strength	Between terminals of the same polarity	1,000 VAC, 50/60 Hz for 1 min
Dielectric strength	Between each terminal and non- current-carrying metal part	2,000 VAC, 50/60 Hz for 1 min/Uimp at 2.5 kV (EN60947-5-1)
Rated insulation voltage (Ui)		150 V (EN60947-5-1)
Pollution degree (operating environment)		3 (EN60947-5-1)
Short-circuit protective device (SCPD)		10 A fuse type gI or gG (IEC60269)
Conditional short-circuit current		100 A (EN60947-5-1)
Conventional enclosed thermal current (Ithe)		5 A (EN60947-5-1)
Protection against electric shock		Class II (grounding not required with double insulation)
OFF reverse voltage		1,000 VAC max., 300 VDC max. (EN60947-5-1)
Vibration resistance	Malfunction	10 to 55 Hz, 1.5-mm double amplitude
Shock resistance	Destruction	1,000 m/s² max.
Shock resistance	Malfunction	300 m/s² max.
Ambient operating temperature		-10°C to +80°C (with no icing)
Ambient operating humidity		35% to 95%RH
Weight		Approx. 62 to 72 g

Note:The figures at the left are initial values.

Note:The ratings at the left may vary depending on the model. Contact your OMRON representative for further details.

Note:The head section of the plunger type SHL-D(Q)[][] is excluded.

Note:Durability values are calculated at an operating temperature of +5°C to +35°C, and an operating humidity of 40% to 70%RH.

Note:The values are for the plunger-type models.