Omron, ZE / ZV / ZV2 / XE / XV / XV2 Series

• Z General-purpose Basic Switches are built into ZE, ZV, and ZV2 Switches. They provided high durability and high breaking capacity.

• X Basic Switches with magnetic blowout are built into XE, XV, and XV2 Switches. DC models have also been added to the series.

• Three mounting methods (side, base, and diagonal side) and many types of actuator are available.

• Terminals face the front when the cover is removed for easy connection.

• Switches with ground terminals have CE marking.

• Approved by UL, CSA, and CCC (Chinese standard). (Ask your OMRON representative for information on approved models.)

last update: September 24, 2012

Ratings

Model	Rated voltage	Non-inductive load (A)				Inductive load (A)
		Resistive load		Lamp load		Inductive load		Motor load
		NC	NO	NC	NO	NC	NO	NC	NO
ZE-[] ZV-[] ZV2-[]	125 VAC 250 VAC 480 VAC	15 15 10		3 2.5 1.5	1.5 1.25 0.75	15 15 6		5 3 1.5	2.5 1.5 0.75
ZE-[] ZV-[] ZV2-[]	125 VDC 250 VDC	0.5 0.25		0.5 0.25		0.05 0.03		0.05 0.03
XE-[] XV-[] XV2-[]	8 VDC 14 VDC 30 VDC 125 VDC 250 VDC	10 10 10 10 3		3 3 3 3 1.5	1.5 1.5 1.5 1.5 0.75	10 10 10 7.5 2	10 10 10 6 1.5	5 5 5 2 2	2.5 2.5 2.5 2.5 1.5

Inrush current	NC	30 A max.
Inrush current	NO	15 A max.

Note:The above figures are for standard currents.

Note:Inductive loads have a power factor of 0.4 min.(AC) and a time constant of 7 ms max. (DC).

Note:Lamp load has an inrush current of 10 times the steadystate current.

Note:Motor load has an inrush current of 6 times the steady-state current.

Characteristics

Degree of protection		IP65 *1
*Durability 2**	Mechanical	Z[]: 10,000,000 operations min. X[]: 1,000,000 operations min.
*Durability 2**	Electrical	Z[]: 500,000 operations min., for 15 A, 250 VAC resistive load X[]: 100,000 operations min., for 10 A, 125 VDC resistive load
Operating speed		Plunger type: 0.01 mm/s to 0.5 m/s Lever type: 0.02 mm/s to 0.5 m/s
Operating frequency	Mechanical	120 operations/min
Operating frequency	Electrical	20 operations/min
Rated frequency		50/60 Hz
Insulation resistance		100 MΩ min. (at 500 VDC)
Contact resistance		15 mΩ max. (initial value)
Terminal temperature rise		50°C max.
Dielectric strength	Between terminals of the same polarity	1,000 VAC, 50/60 Hz for 1 min
	Between current-carrying metal part and ground	Z[]: 2,000 VAC, 50/60 Hz for 1 min X[]: 1,500 VAC, 50/60 Hz for 1 min
	Between each terminal and non-current-carrying metal part	Z[]: 2,000 VAC, 50/60 Hz for 1 min X[]: 1,500 VAC, 50/60 Hz for 1 min
Vibration resistance	Malfunction	10 to 55 Hz, 1.5-mm double amplitude *3
Shock resistance *3	Destruction	1,000m/s² max.
Shock resistance *3	Malfunction	100 m/s² max. 4 50 m/s² max. 5
Ambient operating temperature		-10°C to +80°C (with no icing)
Ambient operating humidity		General-purpose type: 35% to 85%RH Sealed type: 35% to 95%RH
Weight		Approx. 260 to 280 g

Note:The above figures are initial values.

Note:IP65 for []-N models and IP60 for []-Q models.

Note:The values are calculated at an operating temperature of +5°C to +35°C, and an operating humidity of 40% to 70%RH. Contact your OMRON sales representative for more detailed information on other operating environments.

Note:At the operation limit positions.

Note:Only for plunger, sealed plunger, roller arm lever, and sealed roller arm lever.

Note:Only for crossroller plunger, sealed crossroller plunger, roller plunger, and sealed roller plunger.

last update: September 24, 2012

Side Mounting Models

Plunger
ZE-Q-2
XE-Q-2

ZE / ZV / ZV2 / XE / XV / XV2 Dimensions 2

Roller Plunger
ZE-Q22-2
XE-Q22-2

ZE / ZV / ZV2 / XE / XV / XV2 Dimensions 3

Crossroller Plunger
ZE-Q21-2
XE-Q21-2

ZE / ZV / ZV2 / XE / XV / XV2 Dimensions 4

Roller Arm Lever
ZE-QA2-2
XE-QA2-2

ZE / ZV / ZV2 / XE / XV / XV2 Dimensions 5

Note: 1. Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions.
2. The diagrams shown the Switches with two, M4 screws (length: 45) attached. (The screws are provided.)

ZE / ZV / ZV2 / XE / XV / XV2 Dimensions 7

Please click image to enlarge (open in a new window).

One-way Action Roller Arm Lever
ZE-QA277-2
XE-QA277-2

ZE / ZV / ZV2 / XE / XV / XV2 Dimensions 8

Sealed Plunger
ZE-N-2
XE-N-2

ZE / ZV / ZV2 / XE / XV / XV2 Dimensions 9

Sealed Roller Plunger
ZE-N22-2

ZE / ZV / ZV2 / XE / XV / XV2 Dimensions 10

Sealed Crossroller Plunger
ZE-N21-2

ZE / ZV / ZV2 / XE / XV / XV2 Dimensions 11

Sealed Roller Arm Lever
ZE-NA2-2
XE-NA2-2

ZE / ZV / ZV2 / XE / XV / XV2 Dimensions 12

One-way Action Sealed Roller Arm Lever
ZE-NA277-2
XE-NA277-2

ZE / ZV / ZV2 / XE / XV / XV2 Dimensions 13

Note: 1. Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions.
2. The diagrams shown the Switches with two, M4 screws (length: 45) attached. (The screws are provided.)

ZE / ZV / ZV2 / XE / XV / XV2 Dimensions 15

Base Mounting/Diagonal Side Mounting Models

The diagrams show the base-mounted model (ZV-[] or XV-[]) on top and the diagonal side-mounted model (ZV2-[] or XV2-[]) on bottom.
The flange on base-mounted models is shown with dotted lines.

Plunger
ZV(2)-Q-2
XV(2)-Q-2